990C-Ⅱ Double Channel 5Axis Acetate CNC Machine

Home / Products & Solutions / Acetate Eyewear / 990C-Ⅱ Double Channel 5Axis Acetate CNC Machine

RIKE 990C-Ⅱ

Double Channel 5Axis Acetate CNC Machine

This machine is a dual-channel five-axis CNC milling machine capable of synchronous processing of inner and outer contours. The processing speed is approximately 90-180 seconds per piece. The machine consists of 11-12 axes and is equipped with 11-12 sets of Yaskawa servo motors from Japan. All main axes are driven by motors, lead screws, and guide rails, ensuring safety and stability. It is equipped with a high-speed automatic tool changer for efficient and safe tool change. The machine has a tool reserve of 3 tools for inner contour and 12 tools for outer contour, allowing a total of 15 tools to be used. It can complete any complex design in a single operation.

The machine features automatic feeding and simultaneous inner contour processing, saving time on outer contour processing. It has automatic tool change functionality for outer contour processing, allowing for synchronized tool change. The five-axis capability includes automatic flipping. It also has automatic material collection functionality, reducing manual material handling and preventing material loss.

The previous: 990C Auto 5Axis Intelligent CNC

Next: 790A Fully Automatic Frame Bending Machine

Equipment structure

Configuration table
Control system	SYNTEC
Servo motor/driver	Japan YASKAWA
Screw rod	Japan THK
Guide	Japan THK
Principal axis	Huadao
Cylinder	AIRTAC

Technical parameter
X/Y/Z axis motion positioning	0.008/0.008/0.006mm
X/Y/Z axis working stroke	200/200/200mm
Repetitive positioning accuracy	0.005/0.005/0.005mm
X/Y/Z cutting feed rate	1-10000mm/min (Minimum setting unit: 0.001mm)
X/Y/Z fast moving speed	20M/min
Maximum load of rotary table	10kg
Spindle speed	1000-24000rpm
Spindle power	1.8kw
Number of spindle	3+2 automatic tool change spindle
Spindle diameter	Φ80mm
Spindle coaxiality	0.01(2000mm/min)
Magazine capacity	3+12=15pcs
Fast moving speed	12m/min
Maximum cutting feed speed	6m/min
Driving system	AC servo
X/Y/Z axis guide rail length	230mm
X/Y/Z axis screw rod structure	ball screw
X/Y/Z axis lead screw length	250mm

Basic parameter
Air supply pressure	0.6MPa
Power	4.5KW
Frequency	50HZ
Voltage	220V
Machine size	1000×1800×1400
Weight	2000KG

Random accessories
Cooling oil tank	1PCS
Allen key	1PCS
Halt	8PCS
Open end wrench	1PCS
Pulling nail	8PCS
ER16-4	3PCS
Lock mouth ER16-6	3PCS
Lock mouth ER16-8	3PCS
Square wrench	10PCS
Open end ring wrench 25	1PC
Open end wrench 14-17	1PC

Machinery Maintenance and Repairs

In order to ensure the normal working of machine, it is necessary to carry out an extraordinary careful maintenance of the machine in accordance with the following methods.

Key points of daily maintenance

To check and adjust the sheet width until it is consistent with the setting value of system.
To cut the power every time when the operation is completed.
To clear and wipe the machine surface and keep its appearance clean and tidy. No piling of any other it emson the machine.
Every time when the operation completed, please clear and clean the environment to make and keep it clean and dust-free for a good working environment.
When the system oil-level alarms, please add 68# engine oil to fullness, then the alarm can be automatically relieved.
When the machine works out of order, it is important to inform the serviceman in time, or ask the professional electrical engineer to check and repair it. Non-professional personnel are strictly forbidden to remove and repair it.

Usage Safety Requirement

The shell of the machine must be grounded. The area of the outer protective conductor should be bigger than 2.5mm2.
Please keep the protective cover closed when machine is operating.

Transportation and Storage

Each set will be strictly debugged to qualified prior to delivery. According to the outer packing standard, the machine will be packed with wooden knot terrier for shockproof and

dampproof.

No inverting or colliding during the period of transportation.
It requires measurement for dampproof and waterproof during the period of transportation and storage.